Activating a Windows 7 installation is in a way registering Windows 7 operating system of yours and making it legal.

Why activating Windows 7 is important?

Microsoft operating systems had this feature on Windows Vista editions as well as on Windows 7 editions with different Windows 7 Build ’s until its RTM release is published.
And windows activation which is not completed in the given period of time disables some Windows features and prevents you to use all properties of your system after the activation period.
Also you may not be able to update your system with the recent product updated from Microsoft.
So to make sure that you can benefit from all the feaures and enhancements of your Microsoft Windows 7 RC system, give importance to activate Windows7 as early as possible.

How to Activate Windows 7 manually ?

If you did not activate Windows 7 during your Windows 7 installation, you can start activating Windows 7 manually.
You can see for Windows 7 activation you have limited time to complete activating Windows 7 installation.
You can see how much time remaining for you to activate Windows7 for different Windows 7 Build numbers when you open the System control panel screen at the bottom of the panel view.

To open the below System Control Panel screen, you can open the Control Panel, then select System and Security menu item and select the System control panel view.

If you have not activated Windows 7 RC (Release Candidate) Ultimate Edition after you have installed your Windows 7 operating system, you will see the Windows activation section at the botom of the Control Panel screen.
When you have an online internet connection, you can start activating Windows process manually by clicking the “Activate Windows now” link.

On the Windows Activation screen in order to activate Windows 7 Build 7000 for instance, you are reminded how many days are there still for activating Windows 7 Ultimate RC operating system.
Activating Windows 7 will enable you to use all Windows features after the activation period is ended.
So to make sure, if you have an active online internet connection, go on for next steps by selecting the option “Activate Windows online
now”.

This screen displays the message to the user about the product key is being veried. So if the activation can connect to Microsoft via internet connection and manages to validate the product key without any problem you will be redirected to the last screen of the Windows Activation wizard.
This is the activation step the question of “How to register Windows 7″ is answered.
If the system can not reach to the internet due to network errors or a valid internet connection, you will be prompted to define and build an internet connection.

In the below screen you can see the result of a successful activation.
It is stated that your copy of Windows is verified and with a valid copy of Windows 7, you are eligible to recieve all available updates and product support from Microsoft.

As you can see in the above explained steps Windows 7 activation is simple and straight-forward unless you have a valid copy of Windows 7.

Generally you will not face a problem during Windows 7 activation of your Windows copy.
If you experience a problem while trying to register Windows 7, then you can call the Microsoft Support phones or start activation using phone procedure and talk to a support engineer to help you with your Windows 7 activation problem.

A typical USB flash driveMost of us have today a USB flash drive (sometimes also referred to as a USB stick or USB memory stick) that we use when we want to store data temporary. They are small and lightweight and are very practical when you want to move files from one computer to another. Before we often burned the data to a CD or DVD, but using USB flash drives are faster and they are easier to handle and they can store more data. And they are so small that you very easy can store them in your pocket.

USB flash drives are often used when data is moved between home and office. They are also very often used when data is moved inside an office, for example when moving data to/from a computer that is not connected to a network. They are also practical if you want to start small special programs that don’t need installation and is not normally located in a computer.

Nowadays some companies have also started to distribute software, documents, movies and music via USB flash drives. One reason is that they are very fast – they are faster than CDs or DVDs. Programs that are placed on a USB drive are started immediately and large documents are shown very quickly. But when placing programs, documents etc on a USB flash drive, the same problem that was common with a CD or a DVD also occurs here. How can the end-user quickly find the program or document he/she wants to open?

With CD’s and DVD’s the AutoRun technology in Windows was used to start a particular program or open a particular document automatically. But is this possible also with a USB flash drive?

Using AutoRun with USB flash drives

If you place an Autorun.inf file in the root folder of a CD or DVD and the Autorun.inf file contains an OPEN command pointing to a program file (e.g. OPEN=MYAPP.EXE), the program is launched automatically when you insert the CD/DVD in a drive. But if you place the same Autorun.inf file and program file on a USB flash drive and plug the drive to a USB port in a computer, the program is very likely not started automatically. Instead is a Windows menu shown, which contains a list of actions (options) that you can choose between to handle the USB drive.

The AutoPlay dialog box in Windows

The dialog box that is shown when you insert a USB stick in a computer is called the AutoPlay dialog box. This dialog box is also shown when you insert a CD/DVD with no Autorun.inf file in a computers disc drive.

With a CD and DVD this dialog box can be suppressed if an Autorun.inf is placed on the disc. Unfortunately this is not possible, by default, with a USB flash drive. In Windows 7 this is not possible at all.

In Windows XP and Windows Vista it is possible for the user to change the behavior of a USB flash drive by changing settings in Windows, and there exists also programs that can do this automatically. By changing some settings the user can make Windows to run the Autorun.inf file instead of showing the AutoPlay dialog box for USB flash drives. But for security reasons it is not recommended that a Windows user do this. And in Windows 7, with its tightened security, this possibility is completely removed.

So, how to launch a program on a USB flash drive?

Using Autorun.inf to automatically launch a program on a USB flash drive seems not to be possible in the same way as with a CD or DVD. So what to do instead? Are there any alternative ways?

Well, the answer is yes and no. It depends of the version of Windows. Below we will explain how to handle this in different Windows version.

How to launch a program in Windows XP and Windows Vista

As described above in this article, an AutoPlay dialog box is shown when the user plugs a USB stick in a USB port. This AutoPlay dialog box contains a list of action (options) that can be performed on the USB flash drive, for example view a slideshow of pictures on the drive (if there exist any) or open Windows Explorer. In Windows XP and Windows Vista it is possible to extend this AutoPlay dialog box with your own action item (option). This will give the USB flash drive almost AutoRun capability. The item is placed as the first item in the action list, and it is also selected by default, so the user only needs to press Enter or OK to launch the program. Not as automatic as using pure AutoRun, but almost.

To add this action item to the AutoPlay dialog in Windows, a command called ACTION must be placed in the Autorun.inf file. This command will display a user-defined text row in the AutoPlay dialog box (as the first text row) and it will co-operate with the OPEN command in the Autorun.inf file. The OPEN command specifies the filename of the program to execute. We will explain the ACTION command with more details below in this article, but first some words about Windows 7.

How to launch a program in Windows 7

In Windows 7 it is not possible to use the ACTION command and the OPEN command together with USB flash drives anymore. Microsoft has removed this support for security reasons. These commands are still available for CDs and DVDs in Windows 7, but not for USB sticks.

Specifying your own label and icon for the USB flash drive via the Autorun.inf file is still possible, but it is not possible to allow a user to execute a program on the drive via the AutoPlay dialog box. And automatically executing a program on a USB flash drive by turning off AutoPlay and only using AutoRun is not possible either. The OPEN command is not supported at all for USB flash drives in Windows 7.

To execute a program the user must open Windows Explorer and manually run the program. Luckily an option to start Windows Explorer is always shown in the AutoPlay dialog so it is easy to start Windows Explorer. But to make it also easy for the user to find your program on the USB flash drive (the program you want the user to start when plugging in the USB stick) you should always place the program on the root folder of the drive and give it a descriptive name such as “StartMe.exe”, “Autorun.exe”, “Menu.exe” etc. This program file should also be the only executable file in the root folder, otherwise some users might start the wrong program by mistake.

Using the ACTION command in an Autorun.inf file

There are still lot of users that uses Windows XP and Windows Vista so adding an ACTION command to the Autorun.inf file is still a good idea. It is also simple to add this command and below we will show an example of how this command can be used:

[AutoRun]
OPEN=MYAPP.EXE
ICON=MYAPP.EXE
ACTION=Start my application

In this example the ACTION command will place the text “Start my application” in the AutoPlay dialog box in Windows XP and Windows Vista. The item with this text will be placed as the first item and it will also be selected by default. Next to the text, the icon specified by the ICON command is shown. And when the user chooses the selected item, the program file specified by the OPEN command is launched.

If you use Notepad to create the Autorun.inf file, you should enter the following in Notepad:

How to give the USB flash drive a label (title)

It is also possible to give the USB flash drive its own label (title). This will work in all Windows version since Windows XP, including Windows 7.

The label text will be shown in Windows Explorer and in the AutoPlay dialog box. To specify this text, a command with the name LABEL can be used in the Autorun.inf file. Below we show an example of how to use the LABEL command (the last line in the example):

[AutoRun]
OPEN=MYAPP.EXE
ICON=MYAPP.EXE
ACTION=Start my application
LABEL=My Drive

In this example the USB flash drive has been given the label “My Drive”. This label is displayed before the drive letter in Windows Explorer and as a dialog box title in the AutoPlay dialog box. Below we show how the AutoPlay dialog box will look like in Windows XP when using the Autorun.inf file above:

Specifying your own icon for the USB flash drive is also possible. In the example above we tell Windows to get the icon from the MYAPP.EXE program file by using a command named ICON. Instead of an .EXE file you can also use an .ICO (icon) file, for example as:

ICON=MYICON.ICO

More information about the LABEL and ICON commands, and other commands mentioned in this article, can be read on this Microsoft page: Autorun.inf Entries. A short commands reference is also available on this page on our Internet site: Autorun.inf – Commands.

Adding a menu interface to a USB flash drive

Example of an AutoRun menu interfaceThere are different reasons why a specific program should be run immediately after that a USB stick has been inserted in a USB port. One common use is to start a general setup program. Another use is to show a menu interface. This menu interface can for example contain buttons to start installations, show documents or show movies.

As described above in this article, different methods must be used in different Windows versions to start a particular program, for example to start a menu interface program. In Windows XP and Windows Vista the menu program can be launched almost automatically – just press Enter or OK – but in Windows 7 the menu program must be started by the user from Windows Explorer. To handle this in the best way you should do the following:

1. Give the program that should be started a descriptive name
2. Create an Autorun.inf file that adds an action item to the AutoPlay dialog box in Windows

You can for example name the program file to “START-MENU.EXE” and then create an Autorun.inf file with the following contents:

[AutoRun]
OPEN=START-MENU.EXE
ICON=START-MENU.EXE
ACTION=Show Menu
LABEL=My Menu

This file must be placed in the root folder of the USB flash drive. Also the menu program (“START-MENU.EXE”) must be placed in the root folder, otherwise the Autorun.inf file above will not work. It is possible to place the menu program in a sub folder (then you must add a folder path to the OPEN and ICON commands) but it is not recommended; users will then have more difficult to find the program.

Software that can create a menu interface to a USB flash drive

Although it is not complicated to create an Autorun.inf file, it is more time consuming to create a menu interface. There exists lot of products on the market that can create menu interfaces for USB flash drives and some of them can also automatically create the necessary Autorun.inf file that is needed to add an action item to the AutoPlay dialog box in Windows. At our company we have a product named SamLogic CD-Menu Creator, which can be used to design and build menu interfaces for CD, DVD and USB flash drives.

Apple frequently informs me of upgrades and I always take them. Nothing ever seems to go wrong. It’s been that way since I switched to the Mac in 2004. Saturday was the exception.

How My iPhone Became a Brick

The software began to download. I waited. It started loading on the iPhone. Just before it completed it gave me a message.

“Unable to restore iPhone. Error 14 Unknown error”

My iPhone was now a brick. I wasn’t concerned immediately. I just figured it was a random irregularity. I hadn’t jail-broken the iPhone or anything, so it had to be a simple problem. So I tried again. And I got error 14 again. So I went to Apple’s site and read Apple’s suggestion on what to do, such as reboot your Mac/PC then try again, or try it on a different iMac.

I had lost the data on the iPhone, by the way. Once your iPhone is a brick, it gets amnesia and never recovers. You have to reconstitute it. However all data was backed up, so I wasn’t worried.

To cut a long story short, I tried everything Apple recommended, then tried every idea I could find on various iPhone forums. I wasted three hours and all I got was error 14 every time, except once, when iTunes suggested I needed to load different firmware. Well Duh! So I decided to visit the AT&T shop from whence I got the phone.

They were utterly useless. They plugged it it, tried to fix it and gave up after 5 minutes. They knew nothing. I was tempted to tell them that “my phone was now a brick so please replace it.” But I didn’t, because they suggested that I visit the Genius Bar at the local Apple chapel, and I knew that if AT&T gave me a new iPhone there would be hassle in getting it configured to my number. So I went to the local Apple Store, only to discover that I wouldn’t be able to get an appointment with an “Apple Genius” until 11.50 the following day. But never mind, a helpful assistant said he’d see what he coudl do and waltzed off with my Phone. He returned 20 minutes later, to inform me that only a genius could fix it. So I booked in for the following day and went home.

How To Unbrick The iPhone

When I got home, I started to think my way through the problem. I realized I hadn’t done that. I’d just tried every suggestion I’d run into. Most likely the iPhone was corrupted at an OS or firmware level. Quite possibly the download I had originally tried had become corrupt. So, I needed to clean down the phone.

Quite possibly the download I’d loaded was lurking somewhere on my Mac. So this is what I did:

1. I cleaned down the iPhone by putting it in DFU mode (Where DFU stands for Device Firmware Upgrade).
2. I found the download on my Mac and deleted it.
DFU mode. You put an iPhone in DFU mode by doing the following:

* For about 7 seconds keep the “power/lock’ button (top of the phone) and the “home” button pressed – until the iPhone screen goes black.
* Keep them pressed for an extra 2 seconds, then release the “power/lock’ button
* iTunes will then see the the iPhone after about 10 seconds. Now you release the “home” button.
* The iPhone is now in DFU mode.
* You can now reformat the iPhone by reloading everything, but first delete the previous download.

New download. I acquired a valid download by doing the following:

* I went to /library/iTunes/iPhone Software Updates/
* There was a file there which has a name similar to iPhone2,1_3.3.3_7E18_Restore.ipsw. This ipsw file was probably corrupted. So I deleted it. If you don’t delete this, iTunes will try to load it and you’ll have the same problem as before. It all probability, this file is corrupt.
* I restored the iPhone and it worked – because I had reformatted the iPhone and got a fresh update for it.
* Once the iPhone was restored, I reloaded the phone from the last backup.

The only way that this is likely to fail is if the download of the new OS/firmware gets corrupted. So, if it fails, repeat. If this doesn’t work then the odds are that you have a hardware defect and it’s time to get the handset replaced.

The reason I have explained all this is that I couldn’t find an explanation of this on the web. There may be other stuff out there that tells you what to do, but I couldn’t find anything that tells you why you’re doing it.

No big deal guys! Turns out there is absolutely no real reason as to why they aren’t allowing the installation of iTunes to be compatible with Xp 64. All the drivers are exactly the same for XP/VISTA/7 so we have come up with a trick to allow the installation to proceed anyway.

Basically, the iTunes installer looks at your browser user agent, as well as your registry, to determine what OS you’re running. By simply spoofing these entries, you can allow the installation to take place and control your apple devices flawlessly. This includes all the Apple iPods and iPhones. I have tested this with the iPhone 4 on June 27, 2010.

Follow the fairly easy steps below and you’ll be on your way. I think any medium to advanced windows user should have absolutely no difficulty with this.

Here are the tools you’ll need if you want to get iTunes running on Windows XP x64 edition.

* The latest x64 version of 7-zip
* Microsoft Orca
* The latest x64 version of QuickTime
* The latest x64 version of iTunes (click here if the download link doesn’t work — will happen if Apple updates with a new version)

I would also strongly recommend downloading these files, which are generally a good idea for running iTunes in a 64-bit Windows environment:

* GEAR Software 64-bit CD burning drivers: Apple uses the 32-bit versions of these drivers to enable CD burning/ripping in iTunes. Installing these after installing iTunes should allow you to use iTunes’ built-in CD burning option in XP x64.
* Xiph.Org: QuickTime Components: This package allows you to load up any of the Xiph-supported formats (Ogg Vorbis, FLAC, etc.) in QuickTime, and thus in iTunes as well. You’ll still have to use iTunes’ “Convert to AAC” option on these files before you can sync them with your iPhone or iPod, but at least they’ll show up in your music library.

Once you download all the files, Install both 7-zip and Orca: (7-zip won’t overwrite any of your file preferences if you prefer something like WinRAR; however, I highly recommend you set it to handle all compressed file types (save for .CAB and .ZIP, as they have integrated Windows support) since it’s free and 64-bit native.)

Now, you’re ready to go.

File Extraction

1.) Download the latest itunes x64 from apple.com (download link is above!)
2.) Locate the downloaded file, right click
3.) Select 7-zip from the menu, and “extract to iTunes64Setup\” as it will extract to a contained folder
4.) Open the extracted folder. If you see the following files, you’ve completed step 1
* AppleApplicationSupport.msi
* AppleMobileDeviceSupport64.msi
* AppleSoftwareUpdate.msi
* Bonjour64.msi
* iTunes64.msi
* MobileMe64.msi
* QuickTime.msi
* SetupAdmin.exe

Hacking AppleMobileDeviceSupport64.msi

1.) Right click on “AppleMobileDeviceSupport64.msi” and edit with Orca.
2.) Locate the table titled “Launch Condition”
3.) Right click on the table, and select “Drop Table”
4.) Locate the table titled “InstallUISequence”
5.) Inside “InstallUISequence”, look for the row titled “Launch Condition”
6.) Right click the row titled “Launch Condition” and select “Delete Row”
7.) File > Save

Hacking iTunes64.msi

1.) Right click on “iTunes64.msi” and edit with Orca.
2.) Locate the table titled “Launch Condition”
3.) Right click on the table, and select “Drop Table”
4.) Locate the table titled “InstallUISequence”
5.) Inside “InstallUISequence”, look for the row titled “Launch Condition”
6.) Right click the row titled “Launch Condition” and select “Delete Row”
7.) Locate the table titled “ServiceControl”
8.) Right click on the table, and select “Drop Table”
9.) Locate the table titled “ServiceInstall”
10.) Right click on the table, and select “Drop Table”
11.) File > Save

Installation

You MUST install this in the following order.

1.) Install AppleApplicationSupport.msi
2.) Install AppleMobileDeviceSupport64.msi
3.) Install iTunes64.msi

Furthermore:

After installation is complete, upon loading iTunes some users have experienced ipodservice.exe crashing.  ipodservice is the script that tells your iTunes that a device has been attached to your computer.  I personally experienced this issue and was able to get my itunes to recognize my device regardless of the ipodservice crash by following these steps:

1.) Make sure you’ve properly installed:
* Install AppleApplicationSupport.msi
* Install AppleMobileDeviceSupport64.msi

2.) Connect iPhone. If Windows x64 tries to automatically load a driver, it won’t detect the iPhone. Let it finish.

3.) Access Device Manager. (Right-Click on My Computer, Select ‘Properties’, select ‘Hardware Tab’, Click on ‘Device Manager’

4.) Look for ‘Imaging Devices’. It probably says “Digital Camera” instead of “Apple iPhone”

5.) Right Click on “Digital Camera” and select “Update Driver…” and you’ll start the Hardware Update Wizard.

6.) Select “No, not this time” if Windows asks to connect to Windows Update to search for software.

7.) Select “Install from a list or specific location (Advanced)”

8.) Select “Don’t Search. I will choose the driver to install”

9.) Select the unsigned driver, “Apple Mobile Device USB Driver.” Click ‘Continue’ if it complains the driver isn’t signed.

Afterwards the iPhone should properly show up in ‘My Computer’ as an “Apple iPhone.”

* Imaging Devices should show “Apple iPhone”

* Universal Serial Bus Controllers should show “Apple Mobile Device USB Driver”

If it wasn’t active already, launch iTunes. Even though iPod Services is broken, your iPhone will be available to sync.

All done, you should now be able to run iTunes 9 on Windows XP 64-bit/Windows 2003 Server along with your Apple devices.

Important note: Remote desktop is only included in the Professional,
Business, or Ultimate versions of Windows. Home editions do not have remote
desktop.

To get to the configuration page, you can either right-click the Computer
icon and choose properties, or you can type in system into the start
menu search box, and then find the entry for System.

Now you’ll want to click the Remote Settings link on the left hand side:

Now you can finally turn it on:

To connect from another Vista / Win7 PC on the same network, click the
bottom radio button. If you need to connect from an XP/2k machine, click the
“Allow connections from computers running any version of Remote Desktop” radio
button.

Don’t worry about setting up firewall rules, Vista or Windows 7 does that
for you automatically.

Note: This should work for both Windows 7 and Vista.

You need three things to create a remote location:

To set up the Remote Desktop, start with the host computer, which in this
example is your work computer.

Next, make sure you have Windows Firewall set up to allow exceptions.

NOTE:  You may have trouble connecting if your host computer is behind
a router.  I suggest enabling DMZ-Host on your router and/or port
forwarding port # 3389 on the host computer to avoid the router firewall from interfering. 

Connect your remote computer to the host computer

To connect your home computer, which is the client (or remote) computer to
your work (or host) computer, follow these steps:

To end your Remote Desktop session:

There have been a couple of USB Boot methods to install Windows from a thumb drive.  Some are better than others, but most of them have normally required that you be somewhat savvy with the keyboard.  I recently came across a tool called WinToFlash, which basically cuts out any need to prepare your USB thumb drive like the other software I’ve seen.  You simply format the drive, load the install image, and you’re all set.

The beauty of this is quite obvious.  You don’t have to worry about losing your discs (my main concern), you don’t have to worry about scratching them, and you can carry a thumb drive on your key chain if you wanted to.  This software supports Windows 2003, Windows XP, Windows Vista, and Windows 7.  You can either supply a retail disk, a burned copy, or you can extract a downloaded image file to your hard drive and use that directory for the source.  It’s very simple and can end up saving you money and time in the long run.  I highly recommend setting up one of these bad boys for a rainy day.  You never know when you’ll need it.

You can download this app by clicking here, the software is fairly self explanatory.  NOTE:  I did run into an issue with a thumb drive that was not formatted to begin with.  WinToFlash told me the drive “could not be locked”.  I solved this issue simply by doing a manual format from My Computer, by right clicking the drive, selecting “format”, and performing a “quick format”.

The WinToFlash Homepage
Alternative USB Windows Boot Method

Encrypting a footer with base64 will give any user the runaround when trying to configure the theme, but I have a solution to these encryptions. This is mostly because it’s not TRUE encryption. PHP can be converted to base64 (I’ll show you an example in a minute) however it’s interpreted by the web browser in HTML, therefore your average joe can decode/decrypt/undo this little trick and find the footer in php instead of ancient hieroglyphics.

Below I will show you, with screen shot examples, how to bypass this nonsense:

[CLICK TO ENLARGE IMAGE]

Here are the steps that you need to follow:
First of all you need to navigate to the theme editor on your control panel. It is located under the Design menu. Once you are there follow these steps.

Find the index.php file. Click on it to open it.

[CLICK TO ENLARGE IMAGE]

Now you need to find the footer include code. In most of the cases the code would look like this

<?php get_footer(); ?>

and would be at the end of index.php file.

If you are finding it hard to locate use Ctrl +F in your browser and paste the above code there. The browser will do it for you.
Now we need to add two simple codes one on the top and another on the bottom of the footer include code. These codes mean nothing but they will indicate to us the start and the end of the footer.
Adding these two codes will not make any difference in the functioning of the theme.

These codes are:

<!--THE FOOTER STARTS-->

&

<!--THE FOOTER ENDS-->

You can write anything you want between <!– and–>

Now our code would look something like this.

<!--THE FOOTER STARTS-->

<?php get_footer(); ?>

<!--THE FOOTER ENDS-->

[CLICK TO ENLARGE IMAGE]

Now open your site in the browser and view the page source. In most of the browsers you can view the page source by right clicking on the mouse and then selecting view source. In Mozilla the shortcut Ctrl + U works great.

In the source code you have to find the code that you have added at the top of the original code.You can safely scroll all the way down to the bottom to find these codes.

Copy all the code that is between the codes that you have added. This is the actual footer code.

[CLICK TO ENLARGE IMAGE]

Copy this code and replace the original footer code (encrypted one) with this particular code. Now you can  change the footer the way you like.